·No need to use sand ash, fly ash, strong plastic agent, water reducer, expansion agent and other additives.

·Accelerator and gas transmission agent can be added to meet the needs of the project.

·Generally do not allow curing agent: when the temperature is too high, only a small amount of water spray curing can be done once or twice.

·After mixing for 3-4 hours, the slump loss is still very small.

·No bleeding, not easy to precipitate, excellent bonding force.

·The cement mortar is milky and its slump is controlled to 5-10 cm, but it has good workability and is easy to be vibrated and leveled.

·In high pressure shotcreting operation, it is easy to pump and transport, the vibration of the conveying pipe is small, and it is not easy to plug the pipe

·The thickness of each pass of high pressure shotcreting can reach 7-8 cm, and the rebound amount is less than 5%.

·The construction temperature is - 5-40 ℃, but does not affect the setting time.

·Milk like cement paste can increase the construction time, but does not affect the setting time.

·It is about 200-300 microstrains, and it has crack resistance.

Reduce the heat of hydration

ZORANOC promotes the breaking and decomposition of cement particles, and the heat energy released by hydration is lower than that of ordinary concrete. At the same time, part of the heat energy released by ZORANOC is absorbed and utilized during the oxidation reaction of metal elements, so the hydration heat energy is reduced.

Reduce shrinkage and cracking

When the water consumption is reduced by 10-20%, the electrolyte is high, and the cement paste increases by more than 10%. The free lime Ca (OH) 2 reacts to form a high consistency crystalline liquid, which is not easy to precipitate and bleed. The evaporation speed of the slurry on the surface of the high electrolyte cement paste is slow, and the crystal liquid grows stably into crystal in the cement paste with stable volume, which can reduce the drying shrinkage and cracking.